The pipes are lengthened by an additional form segment that is screwed under the main form.
A shortening is realized by raising the lower socket with the help of pipe supports.

Production of Dehner pre-pipes and post-pipes (for intermediate press stations):
We supply a jacket insert for partial reduction of the outer diameter on the pre-pipe, adjustable feet for the shell formwork and a sealing ring for the steel sleeve on the post-pipe.

When selecting the platform with rails, the mould will be made in two parts.

For reasons of stability, a sheet thickness of 6 mm is only recommended for pipes with an outer diameter of up to 1,500 mm.

Anchor sockets can be customized according to customer requirements.

For reasons of stability, a sheet thickness of 6 mm is only recommended for pipes with an outer diameter of up to 1,500 mm.

Due to space limitations, a ladder in the core formwork is only possible from a pipe inner diameter of 1,200 mm.

Technical data vibrator:
- 6,000 rpm, 14.0 kN, 1,200 W
- 250 V, 0-200 Hz, 3.60 A, 14.0 kg
- Drilling pattern 108 x 125, 4 x Ø13 mm
- without cable and electrical connection

Technical data vibrator:
- 6,000 rpm, 14.0 kN, 1,200 W
- 250 V, 0-200 Hz, 3.60 A, 14.0 kg
- Drilling pattern 108 x 125, 4 x Ø13 mm
- without cable and electrical connection
For reasons of space, vibrators in the core formwork are only possible from a pipe inner diameter of 1,000 mm.

Depending on the size and transport route, it is necessary to manufacture the core and jacket as two or four detachable parts.